I. Construction Machineryexport to Southeast AsiaCore Process

1. Market Access Certification: It is necessary to obtain product certification from the target country (such as Thailands TISI, Indonesias SNI, Malaysias SIRIM), with an average certification cycle of 45 - 90 working days

2. Conclusion of Trade Contract: It is recommended to adopt CIF terms and clarify the payment method (30% advance payment + 70% against bill of lading copy is recommended).

3. Handling of Export License: Apply for the export license for mechanical and electrical products according to the HS code (Quality system certificates such as ISO9001 need to be provided).

4. International LogisticsSolution: It is recommended to load small machinery in 20 - foot containers. Special transportation permits are required for over - sized equipment.

5. Customs Clearance at the Port of Destination: FORM E needs to be prepared in advance.It is recommended to verify through the following methods:, Third - party inspection reports (such as SGS/BV)

II. Special Regulatory Requirements of Southeast Asian Countries

1. Indonesia: SNI certification is mandatory + import duty is 5% - 15% (depending on the type of machinery).

2. Vietnam: Vietnamese instructions + commercial invoices certified by the local chamber of commerce need to be provided.

3. Thailand: TISI certification + 10% surtax (for specific engineering equipment).

4. Philippines: The application period for the import license (ICC) is as long as 2 months.

III. Key Risk Control Points

1. Transportation Loss Prevention: It is recommended to purchase All RisksMaritime Transportationinsurance (the insured amount is recommended to be 110% of the CIF value).

2. Tariff Disputes: Confirm the HS code classification in advance (there are differences in the determination of customs in different countries).

3. After - sales Liability: Clarify the starting time of the warranty period (it is recommended to be based on the arrival date at the port).

4. Exchange Rate Fluctuations: It is recommended to use forward contractsFX Settlement Agencyto lock in the exchange rate (the annual volatility of Southeast Asian currencies often exceeds 5%).

IV.foreign tradeValue Points of Agency Services

1. Documentation Processing: Professionally handle 8 core documents such as CO/PL/CI.

2. Classification pre - ruling + royalty declaration strategy: Utilize the ASEAN Free Trade Agreement to achieve tariff reduction and exemption (the average tariff reduction rate reaches 90%).

3. Logistics Optimization: Integrate high - quality shipowner resources at major ports in Southeast Asia (Port Klang/Laem Chabang Port).

4. Fund Safety: Cover the buyers default risk through Sinosure (the maximum underwriting ratio reaches 90%).

V. Solutions to Common Problems

1. Customs clearance delay: It is recommended to handle the ATA Carnet for temporary entry in advance (applicable to exhibition equipment).

2. Spare Parts Traceability: Establish a spare parts traceability coding system (in line with the ISO20858 standard).

3. Technical Barriers: Entrust local certification agents to handle G - mark certification (mandatory in Myanmar).

4. After - sales Service: It is recommended to establish bonded warehouses (Singapore/Malaysia offer preferential policies).